Set of belay device Click Up + with brake support plus matching carabiner.
With the Click Up Kit + from CT Climbing Technology, you get the Autotuber Click Up + with brake support and the matching screwgate carabiner: the Concept HMS SGL HC. The Click-Up + belay device is suitable for ropes with a diameter of 8.5 to 11 millimeters and indicates by means of Click whether the rope has been correctly inserted. The new V-Proof system reduces errors resulting from incorrect rope application in the locking phase. In addition, the rope partner can still be safely lowered even if the rope is inserted incorrectly. The Concept HMS carabiner has a classic screwgate, a keylock nose and a snap spring to prevent the carabiner from twisting and cross-loading. In addition, the anodizing prevents wear of the carabiner.Belay Click Up +- more efficiency in rope delivery - faster and without inhibitions - more comfort during belaying in the postclimb, especially when using ropes with thick diameter - reduces possible errors resulting from incorrect rope application in locking phase, thanks to the V-Proof system (patent pending) - allows to stop a fall by holding the free end of the rope with the hand - for rappelling it is enough to press lightly on the device and with the other hand tighten the free end of the rope - improved and applicable with all dynamic single ropes of diameter Ø 8.5-11 mm - if the rope is inserted incorrectly into the device (reversed rope ends), its own v-shaped braking grooves will still allow effective belaying and the rope partner can be braked and lowered without problems - certifications: EN 15151-2:2012 type-2, UIAA - Made in Italy - Weight: 110 gScrewgate carabiner Concept HMS SGL HC- particularly suitable for use with belay devices - large internal space for laying the HMS - pronounced double-T profile for excellent weight-breaking load ratio - machined and lighter shape for better handling - Catch-Free closure, ACL system allows the carabiner to be fixed to the loop of the harness, which is thus more stable and the breaking load of the lower bend is also reduced - keylock nose - special hard anodizing against wear - breaking load transversely: 23 kN - breaking load longitudinal: 10 kN - breaking load open: 8 kN - opening: 21 mm - certification: EN 12275:2013 - H, EN 362:2004 - A/T, UIAA - made in Italy - weight: 77 g
