Release unit for ABS airbags with steel cartridge.
The trigger unit consists of the steel handle and cartridge. Both together weigh 580 grams. If you want it to be lighter, you can resort to the cartridge made of carbon.The cartridge contains non-hazardous, non-flammable gas, as contained in the circulating air. The internal pressure is 300 bar. The piercing of the cartridge may only be done in the piercing unit of the ABS system. Any manipulation of the breech or the cartridge may cause an explosion. There is a risk of injury and death, also for bystanders! The cartridge is designed for a temperature range of -40°C to +50°C. Emptied cartridges can only be refilled by the manufacturer. The exchange for a full cartridge is only possible directly with us (a specialized dealer). Avoid mechanical stress such as dropping the cartridge. The activation handle contains a pressure capsule. By coupling the handle to the insertion sleeve on the carrying strap of the backpack and pulling the activation handle, the capsule is ignited. The explosion pressure flows through the pressure hose to the piercing unit. There, the filled cartridge is pierced by the needle, whose contents pass through pressure hoses to the two airbags, where they fill the airbags in combination with the filling and release unit. The filling time is approx. 2 - 3 seconds.The pressure capsule in the deployment handle can only be activated once. Therefore, each triggered handle, together with the cartridge must be returned to us and replaced.Note: It is absolutely necessary to check the cartridge regularly before use. You can do this by comparing the weight. On each cartridge the total weight without cap is indicated. By reweighing, this check can be made very easily. If there is a deviation of more than 5 grams, a cartridge may no longer be used. When using the activation handle, the pin with which you dock on the pressure hose must be firmly fixed. You can check this by gently pulling it with your fingers. Above all, however, there must be no red band visible on the pin, which always becomes visible when the handle has been triggered.